Panasonic

AJ-SD965E

Consultar

OBSERVACIONES Magnetoscopio AJ-SD965E para edición lineal, archivo para DVCPRO50
CARACTERISTICAS GENERALES Entrada/salida SDI (BNC)
Entrada / salida SDTI para señales DVCPRO50 / DVCPRO (opcional)
Entrada/salida audio digital AES/EBU (BNC)
Entrada/salida IEEE1394(opcional)
Entrada de señal componente analógica (BNC) opcional
Entrada de señal componente analógica (BNC) opcional
Monitor de audio (XLR L/R)
Señal de referencia (BNC)
Entrada/salida de código de tiempo (XLR)
Control de la máquina RS-422A
Tarjeta de interfaz RS-232C
Control paralelo de 25 pines
Controler remoto del codificador
CARACTERISTICAS TECNICAS AJ-SD965E
General Power Supply: AC100 to 240V ±10%, 50 to 60 Hz
Power Consumption: 115W
130W (full option)
Operating Temperature: 5°C to 40°C
Operating Humidity: 10% to 80% (non dew)
Recording Format: DVCPRO50/DVCPRO switchable
Video Format: 625i/525i switchable
Audio Recording Format:48kHz, 16 bit 4CH (DVCPRO50)
48kHz, 16 bit 2CH (DVCPRO)
Recording Track: Digital Video/Audio: Helical track
TC: Subcode area
Cue: 1 longitudinal track
CTL: 1 longitudinal track
Tape Speed: 625i: 67.708mm/s (DVCPRO50)
525i: 67.640mm/s (DVCPRO50)
Tape: Metal Particle
Rec/Play Time: Max. 126 minutes
(Based on AJ-5P126XG cassette)
FF/REW Time: Less than 3 minutes
(Based on AJ-5P92LP cassette)
Search Speed: ±50x
Digital Slowmotion: ?0.43x to +0.43x, +0.5x, +0.75x
(DVCPRO50,DVCPRO)
Editing Accuracy: ±0 frame (TC)
Tape Timer Accuracy: ±1 frame (continuous CTL)
Servo Lock Time: Within 0.5 sec
(colour framing/standby ON)
Video - Sampling Frequency: Y: 13.5MHz, PB/PR: 6.75MHz (DVCPRO50)
Quantization: 8 bits
Compression Method: DV-Based Compression (SMPTE 314M)
Compression Ratio: 3.3:1 (DVCPRO50), 5:1 (DVCPRO)
Error Correction: Reed-solomon product code
Bit Rate: 50 Mbps (DVCPRO50)
25 Mbps (DVCPRO)
[Digital In/Analogue Component Out] (standard)
625i Bandwidth: Y: 25Hz to 5.75MHz (±1.0dB)
PB/PR: 25Hz to 2.75MHz (±1.0dB)
525i Bandwidth: Y: 30Hz to 5.75MHz (±0.5dB)
PB/PR: 30Hz to 2.75MHz (±0.5dB)
S/N Ratio: 60dB or more (Y)
K Factor: 1% or less (Y 2T)
Y/PB, PR Delay: 10 nsec or less
Entrada Video
Analogue Component: BNC x 3 (Y/PB/PR),
(option) Y: 1.0Vp-p, 75Ohm
PB/PR: 0.7Vp-p, 75 Ohm
(100% Colour bar)
Analogue Composite : BNC x 2 (loop-through),
(option) 75 Ohm On/Off, Video:1.0Vp-p(75 Ohm)
Reference: Analogue Composite
BNC x 2 (loop-through) 75 Ohm On/Off
SDI: BNC x 2 (active through),
SMPTE259M-C/ITU-R BT.656-4
SDTI(option): BNC x 1
Salida Video Analogue Component: BNC x 3 (Y/PB/PR),
Y: 1.0Vp-p, 75 Ohm
PB/PR: 0.7Vp-p, 75 Ohm
(100% Colour bar)
Analogue Composite: BNC x 3
Video1/Video2:
Video/WFM switchable
Video 3: Superimpose on/off
SDI: BNC x 3,
SMPTE259M-C/ITU-R BT.656-4
SDI1, SDI2, SDI3 (superimpose on/off)
SDTI(option): BNC x 2
Audio Sampling Frequency: 48kHz (sync. with video)
Quantization: 16 bits
Frequency Response: 20Hz to 20kHz, ±1.0dB
(reference level)
Dynamic Range: More than 90dB
(1kHz, emphasis off, "A" weighted)
Distortion: within 0.05%
(1kHz, emphasis off, reference level)
Cross Talk: Less than ?80dB
(1kHz, between any 2ch)
Wow & Flutter: Below measurable limit
Headroom: 18 dB
De-Emphasis: T1=50 miu/sec, T2=15 miu/sec
ON/OFF (Automatically switching)
Cue Track: 300Hz to 6kHz, ±3dB (DVCPRO50)
Entrada Audio Analogue(CH1/2/3/4): XLR x 4, +4/0/?20 dBu switchable,
600Ohm. /high-impedance switchable
Digital(CH1/2, CH3/4): BNC x 2, AES/EBU
SDI: BNC x 2, (active through)
SMPTE272M-A/ITU-R BT.656-4
Salida Audio Analogue (CH1/2/3/4): XLR x 4, Low-impedance,
+4/0/?20 dBu switchable
Digital (CH1/2, CH3/4): BNC x 2, AES/EBU
1.0±0.2Vp-p, 75 Ohm
SDI: BNC x 3, 75 Ohm
SMPTE272M-A/ITU-R BT.656-4
Monitor: XLR x 2, Low-impedance,
+4/0/?20 dBu switchable
Phones: M3, variable level control, 8 Ohm
CARACTERISTICAS FISICAS Weight: 17.5 k
Dimensions (WxHxD): 424 x 175.2 x 417 mm
INCLUYE Magnetoscopio
Cable alimentación Guía del usuario

Todos los productos vienen un distribuidor oficial

Servicio técnico del proveedor oficial en España.

Los manuales e instrucciones están en castellano.

Los precios incluyen IVA.